Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tremron Roofing: The San Diego Owner’s Guide
If you’re searching for Tremron roofing in San Diego, the short answer is this: we stock Tremron-compatible roof tile and flashing, and the installed replacement cost in San Diego typically runs $710 to $2,950 depending on the scope of the failure. Most homeowners discover the problem the same way: a cracked barrel tile after a Santa Ana wind event, a visible gap where the ridge line meets the tile field, or water staining on the ceiling after the first real winter rain. Isaac Pruett has seen every version of this call across San Diego County, and the fix is almost always faster and cheaper than the homeowner expects when it’s caught early.
Tremron is primarily a concrete hardscape and paver manufacturer, so when a San Diego home has “Tremron roofing,” it usually means Tremron concrete roof tile, a product line that shares the company’s concrete-molding DNA with their pavers. These are dense, cast-concrete tiles, heavier than clay, and they fail differently than clay tile in San Diego’s salt air and sun exposure.
Which Tremron Models This Applies To
Tremron concrete roof tiles come in flat, low-barrel, and high-barrel profiles. The most common on San Diego homes are the flat shake-style and mission barrel profiles, both cast in 18-inch widths with overlapping channels. Here’s the compatibility gotcha that catches a lot of owners: Tremron tiles use a wider side-locking channel than most clay tile profiles, so you can’t mix a Tremron tile with a generic clay tile from the home center and expect it to seat properly. The tile will sit proud, the interlock won’t close, and wind-driven rain finds the gap. If the original roof is Tremron, the replacement tile needs to be Tremron or a matched concrete equivalent with the same channel width.
To identify your exact tile, look at the back face of any loose tile for a stamped code. Tremron stamps a two-letter series code before the date mark. If no tile is loose, measure the exposed width of the tile face (typically 12, 14, or 16 inches), then look at the nose profile. Flat tiles sit near-silhouette against the roof deck. Barrel tiles have a distinct rise. We stock the two most common San Diego profiles on the truck and can match the rest same-week. For discontinued Tremron profiles, we use two California concrete-tile aftermarket producers whose channel molds match Tremron’s dimensions within a sixteenth of an inch. Functionally identical, and the color match is close enough that only a roofer will ever notice.
Mason Remodeling Co San Diego is an independent service provider and not affiliated with Tremron. We carry their compatible profiles because so many 1990s and early-2000s San Diego tract homes were built with them.
Styles & brands we work with
Signs Your Tremron Roofing Is Failing
- Hairline cracks running lengthwise along the barrel. Concrete tile expands and contracts with San Diego’s day-night temperature swings. Over two decades, that thermal cycling causes fatigue cracks. Once the crack opens wide enough to expose the underlayment, the clock starts on leaks.
- Tile spalling, where the surface flakes away to expose aggregate. Coastal salt air accelerates this. If you live west of I-5 in Ocean Beach, Point Loma, or Pacific Beach, you’ll see this sooner than someone in Rancho Bernardo. Spalled tiles absorb more water, which adds roof weight and feeds moss.
- Loose or shifted tiles after high winds. Santa Ana gusts regularly hit 50 to 70 mph on ridgelines in Scripps Ranch, Rancho Peñasquitos, and Tierrasanta. A properly seated Tremron tile shouldn’t lift, but one with a broken anchor lug will slide a few inches and expose the seam underneath.
- Water staining on ceiling corners or near exterior walls. This is the symptom that sends people to the phone, but by this point the tile damage is usually months old. The water traveled from the break, along a rafter, and finally pooled at a drywall seam.
- Granules or concrete dust in gutters. That’s eroded tile surface washing down. A little is normal over decades. A consistent stream of grit in one downspout means one specific tile section is degrading faster than the rest.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Tremron roofing replacement in San Diego falls into two price bands. A straightforward tile swap, where we replace broken or spalled tiles and re-seat the surrounding field, runs $710 to $1,420. A more involved repair, where the failure includes flashing, underlayment, or ridge-line work, runs $1,420 to $2,950. Tile roof repair work across San Diego generally lands at the higher end of that range when the roof is a steep pitch like you see in Mount Helix or La Jolla hillside homes.
Every quote includes the parts, the labor, the disposal of the broken tile, and a written line-item price before we start. No change orders, no verbal estimates that grow on a final bill. The work is covered by our written guarantee for 365 days from the completion date. If anything isn’t right, you get a free return visit, no dispute process, no conditions. That’s the Threshold Standard we’ve held since 2004.
DIY or Call Us?
Here’s the honest split. You can safely inspect from the ground or from a ladder: look for shifted tiles, visible cracks, and tile debris in gutters. If you can safely reach a loose tile at the roof’s edge, you can photograph the underside for the stamped code, which speeds up the whole process. What we don’t recommend is you on a two-story San Diego roof mid-repair. Concrete roof tiles are heavy (a single Tremron barrel tile weighs 9 to 12 pounds), the slope on most San Diego homes runs 5/12 to 8/12, and going up without proper tie-off equipment and roof jacks is how people end up in urgent care with fractures they’ll feel at every family barbecue. Walking an older tile roof wrong cracks more tiles than you came up to fix. If the tile is out of reach or the damage is on a steep or high section, call us at (619) 673-9302 and we’ll get it handled.
FAQs
A Tremron concrete tile roof in San Diego generally lasts 30 to 50 years, with coastal homes trending toward the lower end because of salt exposure. Tell me what’s broken, and I’ll tell you what it takes. Call (619) 673-9302 for a free inspection and we’ll tell you exactly how much life your roof has left.
A hairline crack can sometimes be sealed, but once a tile is spalled or fractured through the barrel, sealing buys you a year at best before water re-enters. Replacement is the real fix, and a single tile swap is one of the cheaper roofing repairs in San Diego at $710 to $1,420 installed. For an exact quote, call (619) 673-9302.
A straightforward tile swap on a standard San Diego single-story home takes one visit, usually two to four hours including setup and roof cleanup. If underlayment or flashing is involved, expect a full day. When you schedule, we’ll tell you the visit window, the technician’s name, and their photo before they arrive.
We keep the two most common Tremron profiles on the truck and can match discontinued profiles within the same week through California concrete-tile aftermarket suppliers. We also stock compatible parts for KraftMaid, Cambria, and Silestone product lines. Call (619) 673-9302, describe the tile, and we’ll tell you same-day whether it’s on the truck or needs to be ordered.
Written by Isaac Pruett, Owner, Mason Remodeling Co San Diego at Mason Remodeling Co San Diego, serving San Diego and nearby areas.
