Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Driveway & Pavers: The San Diego Owner’s Guide
We stock and install CGI-compatible driveway and paver components across San Diego, with installed paver driveway work typically running $8,260 to $21,240 depending on square footage, access, and base prep. Most San Diego homeowners discover a paver problem after winter rains: a low spot holds water for days, an edge paver shifts under a car tire, or a section sinks where the irrigation line ran. You’ll usually see it before you feel it, and by then the base has already started washing out.
Isaac Pruett has seen every paver failure mode San Diego’s clay soil and seasonal rains can produce. Tell me what’s broken. I’ll tell you what it takes. We’re an independent service provider, not affiliated with CGI, but we work with their paver and driveway product lines regularly and know which components actually hold up in this climate.
Which CGI Models This Applies To
CGI paver driveways in San Diego fall into two general groups: interlocking concrete pavers in the 60mm and 80mm thickness ranges, and larger-format slab pavers that run 24″ x 24″ or 24″ x 36″. The 80mm units are what we recommend for any driveway that sees daily vehicle traffic, because 60mm pavers on a marginal base will crack under the repeated load of a full-size pickup or SUV. If you have the original paperwork, the product code is stamped on the crate or order sheet, usually beginning with a series identifier followed by color and finish codes. If you don’t have paperwork, pull one paver from an inconspicuous edge and measure the thickness with a tape: that single number tells us more than the color ever will.
For replacement work, OEM CGI pavers give you the exact color match, especially on colored or tumbled finishes that have weathered in the sun for a few years. A quality aftermarket equivalent can work for structural repairs under the surface, like base stabilization or edge restraint, where nobody sees it. We’ll walk you through which makes sense for your specific repair before any money changes hands.
Styles & brands we work with
Signs Your CGI Driveway & Pavers Is Failing
- Standing water that lingers more than 30 minutes after rain. This means the base layer has settled unevenly and the sand bedding has washed out beneath the low spot. Left alone, the pavers will continue to sink and the problem spreads outward.
- Edge pavers shifting or separating from the border. The edge restraint, usually plastic or aluminum, has failed or was never installed correctly. Once the edge lets go, the entire field of pavers can start drifting.
- Crumbling or spalling paver surfaces. San Diego’s sun and occasional freeze in the inland valleys will break down lower-grade pavers over 8 to 12 years. What starts as a rough texture becomes deeper pitting and eventually structural failure.
- Sand washing out from between joints after every rain. Polymeric sand breaks down or was never properly activated. Without joint sand, pavers rub against each other and chip at the corners.
- A paver that tilts or wobbles when driven over. The base has a void underneath, usually from an old tree root, a broken irrigation line, or a rodent tunnel. This is the one to address quickly because it only gets worse, and the wobble can crack neighboring pavers.
Replacement Cost & What’s Included
What you’ll pay for paver work in San Diego
Paver driveway installation in San Diego runs $8,260 to $21,240 for a standard two-car driveway, depending on size, access to the site, and how much base work is required. On the repair side, a targeted paver replacement typically runs $1,500 to $4,500 depending on the affected area and whether we need to re-compact the base. Paver patio installation runs $4,130 to $12,980. Driveway sealing runs $295 to $825. Concrete driveway installation runs $5,310 to $14,160 if you decide you’d rather pour than re-pave. Asphalt driveway paving runs $4,130 to $10,620. Every job gets a written price before work starts, with parts and labor listed separately so you can see exactly where your money goes. The 365-Day Done Right Promise covers the work for a full year from the completion date. If something’s not right, we come back and make it right at no cost to you.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
You can safely reset a single paver that has tilted: lift it, add a bit of sand, and set it back level. That’s a fair weekend fix and it gives you a sense of the job. But if you have multiple low spots, edge separation, or a base that has eroded, this is heavy, unforgiving work that punishes shortcuts. Replacing a CGI paver driveway properly means excavating the failed base, re-compacting the subgrade, and often hauling away several tons of old material. One wrong step on base prep, and the new pavers fail within two rainy seasons. If the area is large, the pavers are heavy, or the failure points to the base layer, call us at (619) 673-9302 for an honest assessment and a free estimate.
FAQs
CGI interlocking concrete pavers, installed on a properly compacted base, last 25 to 40 years in San Diego’s climate, with the paver surface occasionally needing re-sanding of the joints every 5 to 8 years. The base underneath usually fails before the pavers themselves do, which is why we focus on what’s underneath when we bid a repair.
Yes, a localized repair is possible if the failure is confined to one area and the base is still intact; we can pull and reset pavers, repair the edge restraint, or re-sand joints without touching the rest of the driveway. If the base has washed out across a large section, you’ll spend more patching it over time than replacing it correctly. Call (619) 673-9302 for a straight answer on which situation you have.
A minor paver repair in San Diego, like resetting a few shifted pavers or repairing an edge, typically takes one day. A full driveway replacement usually takes 3 to 5 working days depending on excavation depth, base work, and weather.
We handle sourcing for you, working with the same specification-grade material partners we use for every job, and if we can’t match an existing CGI color exactly, we’ll tell you before work starts so you can decide how to proceed. We also stock parts and materials for kitchen and bath work, including KraftMaid cabinetry and Cambria and Silestone surfaces, so this is a one-call resource for most of your home’s hard surfaces.
Get a Free Estimate for Your CGI Driveway or Pavers in San Diego
Call us at (619) 673-9302 and we’ll schedule a time to look at your driveway, give you a written price before any work starts, and send you the name and photo of the technician coming to your door. A live person answers our calls around the clock, every day. No call trees, no voicemail loops, just a straight answer on what it takes to fix your pavers right.
Written by Isaac Pruett, Owner, Mason Remodeling Co San Diego at Mason Remodeling Co San Diego, serving San Diego and nearby areas.
